amiad AMF-36K Installation And Operation Instructions Manual Download Page 43

Page: 43 / 71

AMF² 36K + HMI 08.2013

Page 43 of 71

3.8.3 Status screens

System Status Screen

This screen presents the System Status Table:

Status

– The general status of the system: Idle, Pause, Filtering,

Back-flushing, Fault, Attention, Alarm, Delay, etc.

- The current Differential Pressure reading

Inlet Pressure

- The current Inlet Pressure reading

Outlet Pressure

- The current Outlet Pressure reading

Time to next Flush

- Time to the next timed flush cycle. It reset

back to the initial value with every flush cycle.

Time from last flush

- The time passed from the previous flush.

Flush Counter

- The total count of flush cycles.

System Messages Screen

This screen presents:

System Faults

–

When the system has no faults "No Fault" is

displayed. In case of more than one fault message, the display
alternates the existing fault messages once at every 3 seconds.

System Alarms

–

When the system has no alarms "No Alarm" is

displayed. In case of more than one alarm message the display
alternates the existing alarm messages once at every 3 seconds.

System Attentions

–

When the system has no Attentions "No

Attention" is displayed. In case of more than one message the
display alternates the existing Attention messages once at every
3 seconds.

A list of possible system messages appears in chapter 3.9 of this
manual.

Last flush Caused by

- The cause of the previous flush: DP, High

DP, Time, Remote or Manual

Summary of Contents for AMF-36K








































































Search results

Summary of Contents for AMF-36K

Reviews:

amiad AMF-36K, Installation And Operation Instructions Manual, Page: 43 / 71

Search results

Summary of Contents for AMF-36K

Reviews: