amiad AMF-36K Installation And Operation Instructions Manual Download Page 47

Page: 47 / 71

AMF² 36K + HMI 08.2013

Page 47 of 71

3.8.5 Tools screens

Language Screen

This screen allows the operator to:

Select the desired HMI language.

Press the desired national flag and press OK.

Note:

please refer to chapter 2.5

Changing the HMI language

for

a complete explanation on the multilingual feature of the HMI
system.

Valves 1 Screen

This screen allows the operator to set the:

Inlet / Outlet Closing Delay

– Set the delay for closing the inlet

and outlet valves. (Default value - 10 seconds.)

Duration of Filter Draining

– Set the time required to completely

emptying the filter. (Default value - 60 seconds.)

Flush Valve Closing Delay –

Set the delay for closing the Flush

Valve (V5). (Default value - 10 seconds.)

Drain Valve Closing Delay –

The delay for closing the Drain Valve

(V4). (Default value - 10 seconds.)

Duration of Filter Refilling -

Set the time required to fill the filter

after flushing. (Listen to the noise of the exhaust air in order to
determine the end of the filling process). (Default Value - 40
seconds.)

Summary of Contents for AMF-36K








































































Search results

Summary of Contents for AMF-36K

Reviews:

amiad AMF-36K, Installation And Operation Instructions Manual, Page: 47 / 71

Search results

Summary of Contents for AMF-36K

Reviews: