AMI Analyzer Manual
Accessories
35
”Guardian” Liquid Rejection Probe
Unique membrane and diaphragm design prevent the
occasional slugs of liquid gunk traveling down the gas
pipeline from flooding out expensive analytical
equipment. Prevents costly repair and down time.
Break through check valve allows gas to flow in one
direction only. This prevents "Air" from being drawn
into a flammable gas pipeline via the exhaust port in
the event the gas field suddenly experiences a vacuum
condition.
Available with or without pressure reducing regulator
The Guardian automatically drains liquids back into the
pipeline without the need for a bypass gas port, which
wastes considerable amounts of flammable gas.
Demister
Very efficiently cools hot saturated sample gas to
ambient temperature, causing liquids to coalesce into
droplets and return via gravity back to the gas pipeline.
The Demister prevents liquids from accumulating down
stream in expensive analytical instruments causing costly
repairs and down time.
Calibration tubing
This unique high pressure, non-diffusive sample gas
tubing is outfitted with special connection fittings.
Designed with an o-ring/swage seal and requiring only
finger tightening, the tubing and fittings are rated up to
6,500psig. It continues to provide a leak tight seal even
after thousands of connections without causing damage
to the female portion of the compression fittings,
generally attached to the expensive gas analyzers.
With conventional fittings, damage often occurs after
just one reconnection simply due to the metal-to-metal
swaging design, resulting in gas leaks. Even very minute
leaks can wreak havoc with low level ppm oxygen
measurements.
In addition, the plastic tubing is filled with a Kevlar fiber
making it virtually non-diffusive and well suited for high
pressure applications. This makes for a perfect choice