BEDIENUNGSANLEITUNG / INSTRUCTION MANUAL AMC100
44
To avoid short-circuiting the battery, always connect the charging cables to the charger first and then to the battery.
Always disconnect the battery from the charging cables first when charging is finished. Never disconnect the cables
from the charger when a battery is connected to it.
BALANCE-SOCKET:
The balance cable attached to the battery must be connected to the charger so that the black cable is aligned with the
negative marking. Pay attention to the correct polarity! (See connection diagram on the next page).
CONNECTING THE BATTERY
To connect a lithium battery with a balance plug, please proceed as follows.
1.
Connect the charging cables to the charger, making sure that the polarity of all cables is correct.
2.
Switch on the charger and check that the settings match the battery you want to charge.
3.
Connect the main cables of the battery to the main cables of the charger.
4.
Connect the balance cable of the battery to the correct balance connector on the multibalance board. If you are not
sure which socket to use, please ask your dealer.
5.
Start the charging cycle, wait, and watch if the charger starts charging and shows correct values on the screen. 6.
6.
When charging is complete, disconnect the balance cable from the board and then disconnect the main battery
cables from the charger cable.
WARNING:
Errors when connecting, can damage the charger!
