BEDIENUNGSANLEITUNG / INSTRUCTION MANUAL AMC100
47
This screen shows the number of cells you have set and that the processor has
recognised.
R=Number of cells recognised by the charger.
S=Number of cells you set on the previous screen.
If both numbers are identical, you can start charging. If they are not, press the
BATT TYPE / STOP button to return to the previous screen and check the
number of cells in the battery pack again before continuing.
This screen shows the real-time status during charging. Press the BATT TYPE /
STOP button once to stop charging.
CHARGING LITHIUM BATTERY
This charging mode is for charging LiPo/LiFe/LiIon/LiHV batteries in normal mode.
Note: We recommend charging lithium batteries with a balance cable in balance mode only.
The left side of the first line shows the selected battery type. The value on the
left side of the second line of the charger is the current set by the user. After
setting the current and voltage, press the START/ENTER button for more than 3
seconds to start the process.
This shows the number of cells that you have set and that the processor has
recognised.
R=Number of cells recognised by the charger.
S=Number of cells you have set on the previous screen.
