UPS + Isolation Transformer User Manual
© 2020 AMETEK Electronic Systems Protection | Technical Support: 1-800-645-9721 | surgex.com
9
UNPACKING THE UPS
CAUTION
•
Unpacking the unit in a low-temperature environment may cause condensation to
occur in and on the unit. Do not install the unit until the inside and outside of the unit
are absolutely dry {hazard of electric shock}.
•
The unit is heavy. Use caution when unpacking and moving the unit.
Use care when moving and opening the carton. Leave the components packaged until ready
to install.
To unpack the unit and accessories:
1. Open the outer carton and remove the accessories packaged with the unit.
2. Carefully lift the unit out of the outer carton.
3. Store the carton for future use.
Place the unit in a protected area that has adequate airflow and is free of
humidity, flammable gas and corrosion.
NOTE:
Before installation, please read and understand the following instructions. Carefully
examine the carton for damage. Notify the carrier immediately if damage is observed.
Be sure to save the carton should you ever need to ship the UPS for repair or
maintenance.
This UPS is intended for indoor use only. Although your UPS is very
rugged, its internal components are not sealed from the environment.
The UPS must be installed in a protected environment away from heat
producing appliances such as furnaces, radiators, and heaters. Protect
the UPS from exposure to dripping or standing water and high humidity
or condensing air conditions.
