UPS + Isolation Transformer User Manual
© 2020 AMETEK Electronic Systems Protection | Technical Support: 1-800-645-9721 | surgex.com
4
STATEMENT OF INTENDED USE
NOTE:
•
The UPS is intended for stationary use.
•
The UPS is not intended for patient contact or for installation that will cause accidental
contact of patients.
•
Do not use this UPS for life support applications in which a malfunction
or failure of the UPS system could cause failure or significantly alter
the performance of a life-support device.
•
Do not use this UPS near or around flammable gases. Do not use this
UPS within oxygen-enriched atmospheres.
•
Do not disassemble the UPS.
•
The UPS is CLASS 1 equipment.
•
Do not attempt to power the UPS from any receptacle except a properly grounded
receptacle that matches the input plug provided with the UPS.
•
Do not place the UPS near water or in environments of excessive humidity.
•
Do not allow liquid or any foreign object to get inside the UPS.
•
Do not block air vents on the front of the UPS.
•
Do not plug appliances such as hair dryers, fans, heaters, etc. into the
UPS.
•
Do not place the UPS under direct sunshine or close to heat emitting sources
(excessively warm temperatures will shorten battery life).
•
This UPS is intended for installation in a temperature controlled, indoor area free of
conductive contaminants.
•
The AC power source for the UPS should be conveniently near the UPS and easily
accessible
–
avoid extension cords or temporary power strips to power the UPS.
