Ametek Sorensen XFR 100-28, Manual

Page: 27 / 99

Installation
2-2 TM-F2OP-C1XN-01
Basic Setup Procedure
See Table 2-1 for a summary of the basic setup procedure and an overall
view of the subsections in Chapter 2. Use the procedure as a quick
reference if you are familiar with the installation requirements for the
power supply. If you want more information, each step in the procedure
refers to subsequent sections which contain more details. Execute each
step in the sequence given.
See Chapter 3 for instructions about front panel operation, OVP, OTP,
shutdown, and using multiple supplies. You will find remote
programming and monitoring described in Chapter 4.
Table 2-1 Basic Setup Procedure
Step # Description Action Reference
1 Inspection Perform an initial physical inspection of
the supply. “Inspection, Cleaning, and
Packaging” on page 2–3
2 Installation Install the supply (bench or rack
mount), ensuring adequate ventilation. “Location, Mounting, and
Ventilation” on page 2–4
3 Input Power Connect AC input power. “AC Input Power” on page 2–5
4 Test Perform functional tests for voltage
mode operation, current mode
operation, and front panel controls. “Functional Tests” on page 2–9
5 Load Connect the load. “Load Connection” on page 2–12
6 Sensing Connect sensing lines. “Local and Remote Sensing” on
page 2–21