![background image](http://html1.mh-extra.com/html/ametek/sorensen-xfr-100-28/sorensen-xfr-100-28_manual_2931318084.webp)
User Diagnostics
TM-F2OP-C1XN-01
5-9
User Diagnostics
If your power supply is not performing as described in this operating
manual, run through the procedures and checks in this section before
calling your service technician. These procedures are confined to
operator-level functions only and do not require cover-off servicing.
Emergency Shutdown
In an emergency, carry out both of these steps:
1. Shut the power supply OFF immediately.
2. Disconnect the power supply from the load.
Unusual or Erratic Operation
If the power supply displays any unusual or erratic operation, follow
these steps:
1. Shut the power supply OFF immediately.
2. Disconnect the power supply from the load.
3. Test the power supply with no load, running the tests in “Functional
4. If the tests show that the power supply is functioning normally, check
all load, programming, and monitoring connections and circuits.
5. Check the AC input for correct voltage and frequency.
If the problem is not solved after following this procedure, or if the unit
fails to operate correctly upon retesting, call your service technician.
Turn to the next page for more information about troubleshooting for
operators.
Summary of Contents for Sorensen XFR 100-28
