American Sportworks Utility Vehicl, Operator'S Manual

Page: 41 / 135

41
Vehicles with serial number less than 17063.
(See brass tag near top of left rear shock absorber)
1. Loosen the cable adjusters behind the dash board. (photo on left)
2. Place the selector lever on the dashboard in forward.
3. Make sure the transmission is fully engaged in forward. The top of the shift lever on the
transmission should be toward the passenger side. You may have to roll the rear wheels a
little until it clicks in.
4. Pull the slack out of the forward most cable under the dash (but do not stretch the spring)
and tighten the adjuster nuts.
5. Place the selector lever on the dashboard in reverse.
6. Make sure the transmission is fully engaged in reverse. The top of the shift lever on the
transmission should be toward the passenger side. You may have to roll the rear wheels a
little until it clicks in.
7. Pull the slack out of the rear most cable under the dash (but do not stretch the spring) and
tighten the adjuster nuts.
If you have tried all of this and it is still not operating correctly, you may need new cables and a
shifter update kit. Please call American SportWorks Customer Service at
1-866-646-5278. Have your Model and Serial number handy when you call.