RPAN
-
The movement of the Pan will be reversed.
1. Access the main menu.
2. Tap the UP button until “
RPAN
” is displayed, press ENTER.
4. The display will show “
ON/OFF
”.
5. Press the UP button to select “
ON
” to activate this function,
or “
OFF
” to deactivate this function.
6. Press ESC to confirm.
7. Press ESC to return to the main menu.
RTILT
-
The movement of the Tilt will be reversed.
1. Access the main menu.
3. Tap the UP button until “
RTILT
” is displayed, press ENTER.
4. The display will show “
ON/OFF
”.
5. Press the UP button to select “
ON
” to activate this function,
or “
OFF
” to deactivate this function.
6. Press ENTER to confirm.
7. Press ESC to return to the main menu.
DISP
-
This function will reverse the display 180º.
1. Access the main menu.
2. Tap the UP button until “
DISP
” is displayed.
3. Press ENTER, the display will show “
ON/OFF
”.
4. Press the UP button to select “
ON
” to activate this function,
or “
OFF
” to deactivate this function.
5. Press ENTER to confirm.
American DJ
®
- www.americandjeurope.com - Dura Spot 150™ Instruction Manual Page 13
Dura Spot 150™
System Menu
American DJ
®
- www.americandjeurope.com - Dura Spot 150™ Instruction Manual Page 16
Operating Modes:
The Dura Spot 150™ can operate in three
different modes. This next section will detail the differences in
the operating modes.
• Stand alone mode -
The unit will react to sound, chasing through the built-in programs.
• Master/Slave mode -
You can daisy chain up to 16 units together to get a synchronized
light show without the need of an external controller. The units will
react to sound chasing through the several built-in programs.
• DMX control mode -
This function will allow you to control each individual fixtures traits
with a standard DMX-512 controller such as the Elation
®
Show
Designer.
™
Universal DMX Control:
This unit allows you to use any universal
DMX-512 controller to control mirror movement, the color wheel, the
gobo wheel, and the shutter (strobe). A DMX controller allows you to
create unique programs tailored to your individual needs. Follow the
set-up specifications that are included with your DMX controller.
1. The Dura Spot 150™ uses eight DMX channels. Channel 1 con-
trols pan, channel 2 controls tilt, channel 3 controls the gobo
wheel, channel 4 controls the gobo rotation, channel 5 controls
the color wheel, channel 6 controls the strobe effect, channel 7
controls the gobo shake, and channel 8 controls the speed of pan
and tilt.
2. To control your fixture in DMX mode, press the ESC button twice.
Now press the UP button until “
A001
” is displayed, press ENTER.
3. Now press the UP button to set your desired address and press
ENTER.
4. Use the controller’s faders to control the various DMX fixture traits.
5. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
6. For help operating in DMX mode consult the manual included
with your DMX controller.
Stand-Alone Operation (Sound Active or Test Mode):
This
mode allows a single unit to run to the beat of the music. Only use
Dura Spot 150™
Operation
