Dura Spot 150™
Features
The Dura Spot 150™ carries a one year limited warranty. Please fill
out the enclosed warranty card to validate your purchase. All returned
service items whether under warranty or not, must be freight pre-paid
and accompany a return authorization (R.A.) number. The R.A. number
must be clearly written on the outside of the return package. A brief
description of the problem as well as the R.A. number must also be
written down on a piece of paper and included in the shipping carton.
If the unit is under warranty, you must provide a copy of your proof of
purchase invoice. You may obtain a R.A. number by contacting our
customer support team on our toll free customer support number. All
packages returned to the service department not displaying a R.A.
number on the outside of the package will be returned to the shipper
at the shippers cost.
Dura Spot 150™
Product Registration
American DJ
®
- www.americandjeurope.com - Dura Spot 150™ Instruction Manual Page 6
To optimize the performance of this product, please read these operating
instructions carefully to familiarize yourself with the basic operations of
this unit. These instructions contain important safety information regard-
ing the use and maintenance of this unit. Please keep this manual with
the unit, for future reference.
Dura Spot 150™
General Instructions
• Micro-Stepping Motors for Smooth Color and Gobo Transitions
• DMX-512 Protocol Compatible (Uses Eight DMX Channels)
• Independent Gobo and Color Wheels
• 7 Rotating Gobos w/ Shake, + Spot - All Replaceable
• 9 Colors, Plus White - With Rainbow Effect
• 3 Operating Modes - Master/Slave; Stand Alone; Sound Active
• Internal Microphone
• ZB-HTI152 Discharge Lamp, 150w 2000 Hours
• Manual Focus Lens
• Variable Strobe
• 360˚ Pan Movement
• 265˚ Tilt Movement
• Digital Display for Address and Function Setting
• Mini/C Input Jack for Blackout Function
(Mini/C Controller Not Included)
American DJ
®
- www.americandjeurope.com - Dura Spot 150™ Instruction Manual Page 23
Dura Spot 150™
Gobo Replacement
Caution!
Never open the unit when in use. Always disconnect
the main power before attempting to change the gobos.
1.
To change the gobos, you must remove the bottom half of the
moving head. The bottom half of the moving head is wear the fan is
located.
2.
Unscrew the four phillips screws, that secure the bottom half, and
remove.
3.
When you remove the bottom half, the gobo and color wheel will
now be accessible. Turn the wheel with your hand until you find the
gobo you would like to change. Turn the color wheel until the empty
space is behind the gobo you would like to change.
4.
Remove the gobo fixation-ring with a small flat-head screwdriver.
Put your finger through the empty space in the color wheel, and push
the gobo out towards the front. When doing this you do not need a
lot of pressure. You can also use tweezers to gently pull the gobo out,
or a small flat-head screwdriver and gently pry out the gobo.
5.
Change the gobo, replace the fixation-ring, and reassemble the
unit.
