American DJ
®
- www.americandjeurope.com - Dura Spot 150™ Instruction Manual Page 11
displayed. Press the Up button if we wish to “flip” the display, and
press Enter.
VERS (Version):
In this menu you can view the software version. Us-
ing the Up button scroll to “VerS” and press Enter. The version should
be displayed. Press ESC to exit this menu.
DEFA (Default):
In this menu you can reset to the default settings.
Using the Up button scroll to “deFA” and press Enter. “Yes” should
be displayed. Press Enter to start the default function.
R.S.E.T. (Reset):
In this menu you can activate reset function. Using
the Up button scroll to “r.S.e.t.” and press Enter. The unit will now
begin to reset.
Dura Spot 150™
System Menu
American DJ
®
- www.americandjeurope.com - Dura Spot 150™ Instruction Manual Page 18
function will allow you to link up to 16 units together and operate with-
out a controller. The units can be sound activate or run in a test mode.
In Master-Slave operation one unit will act as the controlling unit and
the others will react to the controlling units programs. Any unit can act
as a Master or as a Slave.
1. This is a very simple process. Using standard XLR microphone
cables, daisy chain your units together via the XLR connector on
the rear of the units. Remember the Male XLR connector is the
input and the Female XLR connector is the output. For longer
cable runs we suggest a terminator at the last fixture.
You do not
have to assign the units Master/Slave.
They will automatically
fall into Master/Slave mode.
2. Use the sensitivity knob on the rear of the master unit to make it
more or less sensative to sound.
3. The optional Mini/C blackout Controller may be used with in this
operation for blackout.
Dura Spot 150™
Operation
