81
Set up E-Map
Enter the information of DVR and insert a map to arrange the location of device. Once these
devices are triggered, the information can be transferred to a remote site PC via modem or
Internet. The triggered devices will be flashed on the map at the same time. Follow the
instructions below to complete setup.
1.
Click ”
Set up E-Map
“ icon and below picture will be shown.
2.
Enter the DVR name into “
Site name
“.
3.
Click “
Map source
“ icon to browse the map file from DVR folder and then click “
Update
”
icon after you find out the Map file. (The map file can be a BMP or JPG file.)
4.
Enter the data into “
Contact
“, “
Phone
“, “
Address
“ and “
Note
“ tab. It will show the
DVR information on the remote client PC when connecting.
5.
Select
the available devices for decorating on the DVR map from “
Select device
“.
6.
Move to the device and then click and drag down to the suitable location with the left mouse
key. Repeat this process for another device.
7.
Click “
Save
“ button to complete the setting.