![background image](http://html1.mh-extra.com/html/ameba/digicap-ii/digicap-ii_operation-manual_2921873064.webp)
67
Setup relay
(Fig.7-8.1)
Click
“Setup relay”
tab, the window as above right one will be shown. Follow the instructions
below to complete setting.
Control:
You need to specify the device for setting.
No/Name:
Enter “
Controller name
” corresponding to the desired relay number.
Duration:
Enter the controller’s working period when relay trigger.
OK:
Click to accept setting.
Copy:
Copy the parameter setting to another relay.
Cancel:
Discard changes in parameter.
Fig. 7-8.3
Fig. 7-8.4
Control NetCom Module relay
Click
“Control NetCom Module relay”
tab on setup I/O port, as
Fig.7-8.3
, you can control the
relay out manually or trigger by sensors. The purpose of this tab is testing, remote controlling and
manual control controller.