![background image](http://html1.mh-extra.com/html/ameba/digicap-ii/digicap-ii_operation-manual_2921873095.webp)
98
9. Using FreeView Pro (For TCP/IP viewers)
These sections discuss FreeView Pro and how to use it. The main purpose of FreeView Pro is to
provide a way to connect to the Local DVR Server (where you are running DigiCap PRO/XP) to
monitor the cameras there if you happen to be far away from it. With FreeView Pro you can begin
to use automatic remote video security and surveillance via the Internet.
9-1. General Information
Once you have finished installing the software, two icons will be created for you.
You may access them by clicking on the
“Start”
button, the
“Programs”
folder, then
“FreeView
Pro”
and then clicking on the
“Remote Viewer – FreeView Pro”
icon. The following icons are
available:
Remote Viewer - FreeView Pro:
FreeView Pro enables you to remotely patrol your place
from any place at any time as long as you have the access to an Internet.
Uninstall FreeView Pro:
Removes FreeView Pro from your computer.
Two way Communication- EzCTalk –
Real-time audio and video from designated locations
are simultaneously transmitted to both the control center and designated DVR sites. Please
refer
chapter 7-21
.
Remote Control- EZRClient:
Allows the Remote client to set up the DigiCap PRO/XP PC
from remote site such as operating at the local. The detail setting please refer
Chapter 9-9.