114
10. Connect the Local DVR Server via IE Browser
These sections discuss how to setup and use the IE Browser for remote access. The main
purpose of this section is to provide a way to connect to the Local DVR Server (where you are
running DigiCap II DVR) to monitor the cameras there if you happen to be far away from it.
With IE Browser you can begin to use automatic remote video security and surveillance via the
Internet.
You may use the IE Browser to connect the DVR by through the following steps:
On the Witness Local DVR Server:
Step 1.
You must enable
“IE browse server - EzWebServer”
program. The monitor
will display the tab as below:
Step 2.
Click
“Enable auto run system”
and
“Hide window”
to have
EzWebServer
program
automatically starts every time you reboot.
On the Remote client PC
:
Step 1.
Click IE Browse from the Remote client PC and then enter the IP address of Local
DVR Server.
Step 2.
Allows the ActiveX. program to install on your PC when the ActiveX pop-up.
Step 3.
Click
icon to connect the Local DVR Server. The detail setting please see chapter
9-3.
The Tool Menu Bar
The tool menu bar enables you to easily use Internet to connect to the Local DVR Server via IE
Browser, control the video channels of the Local DVR Server, display Local DVR Server video
channels, save video files, and configure exactly how you want the program to work. After you