33
directly to show single or split-screen video on TV. The functions in Remote controller behave
similarly of chapter 5-2 Left Near Panel.
Control multi DVRs via single Remote controller
Sometime there are several DVRs in one place. Please follow the below steps to control multi
DVRs via single Remote controller:
1. There is a Dip switch on the inside of front panel for the setting ID address of DVR, the setting
description as below:
↑
:Disable
↓
: Enable, S5-S8: No function
S1-S4: For ID address setting; the table of ID address as below:
2. It will show the ID address on the LED of front panel after your setting Dipswitch.
The default ID address is “ 0 ”. It does not need to change the setting when use a DVR only.
Control the DVR via Remote controller directly.
The keypad of front panel will be no function when the LED is flashing.
3.
Press “
ID
“ key and then select the “
Number
“ of DVR, which you want to control. The
number LED of front panel will be flashed. You can start to use the Remote controller when
the LED is flashing.
4. Press “
Return
“ key to stop the function of Remote controller.
Switch ID
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
S1
↑
↓
↑
↓
↑
↓
↑
↓
↑
↓
↑
↓
↑
↓
↑
↓
S2
↑
↓
↓
↑ ↑
↓ ↓
↑ ↑
↓ ↓
↑ ↑
↓ ↓
↑
S3
↑
↓
↓
↓ ↓
↑ ↑ ↑ ↑
↓ ↓ ↓ ↓
↑ ↑
↑
S4
↑
↓
↓
↓ ↓ ↓ ↓ ↓ ↓
↑ ↑ ↑ ↑ ↑ ↑
↑