AMD NVMe/SATA RAID Quick Start Guide for
Windows Operating Systems
56268 Rev. 1.05 November 2021
12
Pre-Installation Steps
Chapter 3
3.3
Enable RAID for AMD SP3-Series Chipsets
Note: The steps to configure a system to RAID mentioned here are specific to AMD NDA BIOS
based off the AMI BIOS. The steps for other BIOS Vendors are different.
1.
Power-on the system.
2.
Press
Delete
or
ESC
to enter the
System BIOS
setup page.
3.
In the BIOS setup:
a.
Select the
Advanced
tab, then press
Enter
.
b.
Select the
AMD PBS
tab, then press
Enter
.
c.
Set
NVMe RAID Mode
to
Enabled
.
4.
In the BIOS setup:
a.
Select the
Advanced
tab, then press
Enter
.
b.
Select the
AMD CBS
tab, then press
Enter
.
c.
Select
FCH Common Options
, then press
Enter
.
d.
Select
SATA Configuration Options
, then press
Enter
.
e.
Set
SATA Controller
to
Enabled
.
5.
In the BIOS setup:
a.
Select the
Advanced
tab, then press
Enter
.
b.
Select the
AMD CBS
tab, then press
Enter
.
c.
Select
FCH Common Options
, then press
Enter
.
d.
Select
SATA Configuration Options
, then press
Enter
.
e.
Set
SATA Mode
to
RAID
.
6.
In the BIOS setup:
a.
Select the
Advanced
tab, then press
Enter
.
b.
Select
Promontory Common Options
, then press
Enter
.
c.
Select
PT SATA Configuration Options
, then press
Enter
.
d.
Set
PT SATA Port Enable
to
Enabled
.
7.
In the BIOS setup:
a.
Select the
Advanced
tab, then press
Enter
.
b.
Select
Promontory Common Options
, then press
Enter
.
c.
Select
PT SATA Configuration Options
, then press
Enter
.
d.
Set
PT SATA Mode
to
RAID
.
8.
In the BIOS setup:
a.
Select the
Advanced
tab, then press
Enter
.
b.
Select
CSM Configuration
, then press
Enter
.
c.
Set
CSM Support
to
Enabled
.
d.
Set
Boot Option Filter
to
UEFI Only
.
e.
Set
Storage
to
UEFI
, then press
Enter
.
9.
Save (
F4
) the setting and restart the system.