56268 Rev. 1.05 November 2021
AMD NVMe/SATA RAID Quick Start Guide for
Windows Operating Systems
Chapter 5
Install AMD-RAID Drivers
19
[Public]
6.
At the Load Driver Warning message:
•
Select
OK.
7.
At the Select the Driver to install window:
•
Select
Browse.
•
Navigate to the directory containing the saved
AMD-RAID
drivers.
•
Select
OK.
•
Select the
AMD-RAID Controller (rcraid.inf)
driver in the list.
•
Select
Next.
•
Select (Check Mark)
I Accept the License Terms.
•
Select
Next.
•
Select
Custom: Install Windows Only (advanced)
or similar.
8.
Once both drivers have been loaded, a valid Virtual Disk appears:
•
Select
Load Drivers.
•
Select
Browse.
•
Navigate to the directory containing the saved
AMD-RAID
drivers.
•
Select
OK.
•
Select the
AMD-RAID Config Device
(
rccfg.inf
) driver from the list.
•
Select
Next.
9.
Select Next at the Where do you want to install Windows window.
10.
Follow the on-screen instructions to complete the installation of the applicable Windows
operating system.
11.
After the OS is installed, open
Device Manager
and verify the following:
•
Expand Storage Controllers: there is an entry listed as
AMD-RAID Bottom Device.
•
Expand Storage Controllers: there is an entry listed as
AMD-RAID Controller.
•
Expand System Devices: there is an entry listed as
AMD-RAID Config Device.
12.
Remove the storage medium and Microsoft Windows OS CD -ROM or DVD from
the applicable drive(s) or port.
Proceed Installing the
AMD RAIDXpert2 Management Suite for Windows
®
.
(Refer to