AMD NVMe/SATA RAID Quick Start Guide for
Windows Operating Systems
56268 Rev. 1.05 November 2021
10
Pre-Installation Steps
Chapter 3
Chapter 3
Pre-Installation Steps
3.1
Enable RAID for x570/590 AMD Socket AM4/SP3-
Series Compatible Processors
Note: The steps to configure a system to RAID mentioned here are specific to AMD NDA BIOS
based off the AMI BIOS. The steps for other BIOS Vendors are different.
Complete the following pre-installation steps:
1.
Power-on the system.
2.
Press
ESC
to enter the System BIOS setup page.
3.
In the BIOS setup:
a.
Select the
Advanced
tab.
b.
Select
CSM Configuration
, then press
Enter.
c.
Set
CSM Support
to
Enabled
, then press
Enter.
d.
Set
Boot
option filter
to
UEFI
only, then press
Enter.
e.
Set
Storage
to
UEFI
, then press
Enter.
4.
In the BIOS setup:
a.
Select the
Advanced
tab.
b.
Select
AMD CBS
, then press
Enter.
c.
Select
FCH Common Options
, then press
Enter.
d.
Select
SATA Configuration Options
, then press
Enter.
e.
Set
SATA Enable
to
Enabled
, then press
Enter.
f.
Set
SATA Mode
to
RAID
, then press
Enter.
5.
In the BIOS setup:
a.
Select the
Advanced
tab.
b.
Select
AMD CBS
, then press
Enter.
c.
Select
X570/590 Chipset Common Options
, then press
Enter.
d.
Select
X570/590 Chipset SATA Configuration Options
, then press
Enter.
e.
Set
X570/590 Chipset SATA0 Enable to Enabled
, then press
Enter.
f.
Set
X570/590 Chipset SATA1 Enable to Enabled
, then press
Enter.
g.
Set
X570/590 Chipset SATA Mode to RAID
, then press
Enter.
6.
In the
BIOS
setup:
a.
Select the
Advanced
tab.
b.
Select
AMD PBS
tab, then press
Enter.
c.
Set the
NVMe RAID Mode
to
Enabled,
then press
Enter.
7.
Save (
F4
) the settings and restart the system.