AMD NVMe/SATA RAID Quick Start Guide for
Windows Operating Systems
56268 Rev. 1.05 November 2021
14
Pre-Installation Steps
Chapter 3
3.5
Enable RAID for FP6 Processors
Note: Raid configuration support is restricted to Raid0 level only. The steps to configure a system to
RAID mentioned here are specific to AMD NDA BIOS based off the Insyde BIOS.
1.
Power-on the system.
2.
Press
ESC
to enter the System BIOS setup page.
3.
In the
BIOS
setup:
a.
Select
AMD PBS
tab, then press
Enter.
b.
Set the
NVMe RAID Mode
to
Enabled,
then press
Enter.
4.
Save (
F10
) the settings and restart the system.