56268 Rev. 1.05 November 2021
AMD NVMe/SATA RAID Quick Start Guide for
Windows Operating Systems
Chapter 3
Pre-Installation Steps
11
[Public]
3.2
Enable RAID for 300/400/500 AMD Socket
AM4-Compatible Processors
Note: The steps to configure a system to RAID mentioned here are specific to AMD NDA BIOS
based off the AMI BIOS. The steps for other BIOS Vendors are different.
1.
Power-on the system.
2.
Press
ESC
to enter the
System BIOS
setup page.
3.
In the BIOS setup:
a.
Select the
Advanced
tab.
b.
Select
CSM Configuration
, then press
Enter.
c.
Set
CSM Support
to
Enabled
, then press
Enter.
d.
Set
Boot option filter
to
UEFI
only, then press
Enter.
e.
Set Storage to
UEFI
, then press
Enter.
4.
In the BIOS setup:
a.
Select the
Advanced
tab.
b.
Select
AMD-CBS,
then press
Enter.
c.
Select
FCH
Common Options
, then press
Enter.
d.
Select
SATA Configuration
Options
, then press
Enter.
e.
Set
SATA Enable to Enabled
, then press
Enter.
f.
Set
SATA Mode
to
RAID
, then press
Enter.
5.
In the BIOS setup:
a.
Select the
Advanced
tab.
b.
Select
AMD-CBS,
then press
Enter.
c.
Select
300/400/500 Chipset Common Options
, then press
Enter.
d.
Select
300/400/500 Chipset SATA Configuration Options
, then press
Enter.
e.
Set
SATA Mode
to
RAID
, then press
Enter.
6.
In the BIOS setup:
a.
Select the
Advanced
tab.
b.
Select
AMD-PBS
, then press
Enter.
c.
Set
NVMe RAID Mode
to
Enabled
, then press
Enter.
7.
Save (
F4
) the settings and restart the system.