manualshive.com logo in svg

AMD -K6-2/450 - MHz Processor, Application Note

Share
Download
AMD -K6-2/450 - MHz Processor Application Note Download Page 89

Appendix A

77

23913A/0—November 2000

Embedded AMD-K6™ Processors BIOS Design Guide

Preliminary Information

Functions 8000_0002h, 8000_0003h, and 8000_0004h — Processor Name String

Input:

EAX = 8000_0002h, 8000_0003h, or 8000_0004h

Output:

EAX = Processor Name String
EBX = Processor Name String
ECX = Processor Name String
EDX = Processor Name String

Functions 8000_0002h, 8000_0003h, and 8000_0004h each return part of the processor
name string in the EAX, EBX, ECX, and EDX registers. These three functions use the
four registers to return an ASCII string of up to 48 characters in little endian format.
For example, function 8000_0002h returns the first 16 characters of the processor
name. The first character resides in the least significant byte of EAX, and the last
character (of this group of 16) resides in the most significant byte of EDX. The NULL
character (ASCII 00h) is used to indicate the end of the processor name string. This
feature is useful for processor names that require fewer than 48 characters.

Note: Extended functions 8000_0002h, 8000_0003h, and 8000_0004h return an incorrect

name string for the AMD-K6-2E+ and AMD-K6-IIIE+ processors (Model D). The
returned name string should be AMD-K6™-2+ for the AMD-K6-2E+ processor and
AMD-K6™-III+ for the AMD-K6-IIIE+ processor. However, the actual value returned
for either processor is AMD-K6™-III. The AMD CPUID utility v2.07 should be used
to display the name string specified for AMD-K6E, Model D processors. This utility
can be obtained from http: //www.amd.com/products/cpg/bin/amdcpuid.exe.
Feature bits returned by the standard and extended function calls of the CPUID
instruction should still be used to determine the features and capabilities supported
by the processor in use.

Summary of Contents for -K6-2/450 - MHz Processor



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands