manualshive.com logo in svg

AMD -K6-2/450 - MHz Processor, Application Note

Share
Download
AMD -K6-2/450 - MHz Processor Application Note Download Page 13

23913A/0—November 2000

Embedded AMD-K6™ Processors BIOS Design Guide

Preliminary Information

Introduction

1

Application Note

Embedded AMD-K6™ 
Processors BIOS Design Guide

Introduction

This document highlights the BIOS modifications required to
fully support the AMD-K6™ processors used by AMD’s
embedded customers. The information in this application note
pertains to the following processors in the AMD-K6 family:

■

AMD-K6E embedded processor

■

AMD-K6-2 processor

■

AMD-K6-2E embedded processor

■

AMD-K6-2E+ embedded processor

■

AMD-K6-III processor

■

AMD-K6-IIIE+ embedded processor

There can be more than one way to implement the functionality
detailed in this document, and the information provided is for
demonstration purposes. 

All referenced AMD-K6 processor documents can be found on
the AMD website at http://www.amd.com/. 

Audience

It is assumed that the reader has a solid understanding of the
x86 processors, the x86 architecture, and programming
requirements.

Summary of Contents for -K6-2/450 - MHz Processor



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands