manualshive.com logo in svg

AMD -K6-2/450 - MHz Processor, Application Note

Share
Download
AMD -K6-2/450 - MHz Processor Application Note Download Page 15

Processor Models and Steppings

3

23913A/0—November 2000

Embedded AMD-K6™ Processors BIOS Design Guide

Preliminary Information

AMD-K6™E Embedded Processor

Model 7

Model 7 is the first processor manufactured in the 0.25-micron
process. 

■

Model 7 supports six model-specific registers (MSRs).

AMD-K6™-2 Processor

Some important features supported by the AMD-K6-2 processor
include the 3DNow!™ instruction set and a 100-MHz processor
bus.

Model 8/[7:0]

Model 8/[7:0] is any of eight possible model/steppings—models
8 / 0 ,   8 / 1 ,  8 / 2 ,  8 / 3 ,  8 / 4 ,  8 / 5 ,   8 / 6 ,   o r   8 / 7 .   M o d e l   8 / [ 7 : 0 ]   i s
manufactured in the 0.25-micron process and was the original
version of the AMD-K6-2 available as a desktop product. 

■

Model 8/[7:0] implements the same six MSRs as the Model 7,
and the bits and fields within these six MSRs are defined
identically. 

■

Model 8/[7:0] also implements the SYSCALL/SYSRET
Target Address Register (STAR) MSR for a total of seven
MSRs.

Model 8/[F:8]

Model 8/[F:8] is any of eight possible model/steppings—models
8/8, 8/9, 8/A, 8/B, 8/C, 8/D, 8/E, or 8/F. Model 8/[F:8] is
manufactured in the 0.25-micron process. 

■

Model 8/[F:8] implements the same six MSRs as the models
7 and 8/[7:0], but the bits and fields within two of these
MSRs—WHCR and EFER—are not defined identically. 

■

Also, Model 8/[F:8] supports the STAR MSR and three
additional MSRs, for a total of ten MSRs.

Summary of Contents for -K6-2/450 - MHz Processor



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands