manualshive.com logo in svg

AMD -K6-2/450 - MHz Processor, Application Note

Share
Download
AMD -K6-2/450 - MHz Processor Application Note Download Page 66

54

Model D Registers

Embedded AMD-K6™ Processors BIOS Design Guide

23913A/0—November 2000

Preliminary Information

Enhanced Power Management Register (EPMR) (Low-Power Versions)

To support AMD PowerNow! technology, the low-power versions
of the AMD-K6-2E+ and AMD-K6-IIIE+ processors Model D are
designed with enhanced power management (EPM) features:
dynamic bus divisor control, and dynamic voltage ID control. 

The EPMR register (see Figure 26) defines the base address for
a 16-byte block of I/O address space. Enabling the EPMR allows
software to access the EPM 16-byte I/O block, which contains
bits for enabling, controlling, and monitoring the EPM features.
Table 25 defines the functions of each bit in the EPMR register.
The EPMR register is MSR C000_0086h.

Figure 26.   Enhanced Power Management Register (EPMR) (Low-Power Model D)

Table 25. Enhanced Power Management Register (EPMR) Definition (Low-Power Model D)

Bit

Description

R/W Function

1

Notes:

1. All bits default to 0 when RESET is asserted.

63–16

Reserved

R

All reserved bits are always read as 0.

15-4

I/O BASE Address (IOBASE)

R/W

IOBASE defines a base address for a 16-byte block of I/O 
address space accessible for enabling, controlling, and monitor-
ing the EPM features. 

3-2

Reserved

R

All reserved bits are always read as 0.

1

Generate Special Bus Cycle (GSBC)

R/W

This bit controls whether a special bus cycle is generated upon 
dword accesses within the EPM 16-byte block. If set to 1, an 
EPM special bus cycle is generated, where BE[7:0]# = BFh and 
A[4:3] = 00b.

0

Enable AMD PowerNow! Technology 
Management (EN)

R/W

This bit controls access to the mapped I/O address space for 
the EPM features. Clearing this bit does not affect the state of 
bits defined in the EPM 16-byte I/O block.

C

M

D

Reserved

0

16

63

15

4 3

1

2

E

N

G

S
B

C

IOBASE

Symbol

Description

Bit

IOBASE

I/O Base Address

15-4

GSBC

Generate Special Bus Cycle

1

EN

Enable AMD PowerNow! Technology 
Management

0

Summary of Contents for -K6-2/450 - MHz Processor



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands