manualshive.com logo in svg

AMD -K6-2/450 - MHz Processor, Application Note

Share
Download
AMD -K6-2/450 - MHz Processor Application Note Download Page 75

Embedded AMD Processor Recognition

63

23913A/0—November 2000

Embedded AMD-K6™ Processors BIOS Design Guide

Preliminary Information

Identifying Supported Features

The feature bits are returned in the EDX register for two
CPUID functions—standard function 1 and extended function
8000_0001h. Each bit corresponds to a specific feature and
indicates if that feature is present on the processor. Table 30
summarizes the standard and extended feature bits.

Table 30.  Standard and Extended Feature Bits

Bit

1

Feature

Description

Standard

2

Extended

2

0

Floating-Point Unit

A floating-point unit is available.

1

1

1

Virtual Mode Extensions

Virtual mode extensions are available.

1

1

2

Debugging Extensions

I/O breakpoint debug extensions are supported.

1

1

3

PSE (Page Size Extensions)

4-Mbyte pages are supported.

1

1

4

Time Stamp Counter 
(with RDTSC and CR4 disable bit)

A time stamp counter is available in the processor,
and the RDTSC instruction is supported.

1

1

5

K86™ Family of Processors’ 
Model-Specific Registers (with 
RDMSR and WRMSR)

The K86 model-specific registers are available in the 
processor, and the RDMSR and WRMSR instructions 
are supported.

1

1

6

PAE (Page Address Extensions)

Page address extensions are supported using an 
8-byte directory entry.

1

1

7

MCE (Machine Check Exception)

The machine check exception is supported.

1

1

8

CMPXCHG8B Instruction

The CMPXCHG8B instruction is supported.

1

1

9

APIC

A local APIC unit is available.

1

1

10

Reserved on all AMD processors

0

0

11

SYSENTER/SYSEXIT Instructions

The SYSENTER and SYSEXIT instructions are 
supported.

1

0

SYSCALL and SYSRET Instructions

The SYSCALL and SYSRET instructions and 
associated extensions are supported. 

0

1

12

MTRR (Memory Type Range 
Registers)

Memory type range registers are available.

1

1

13

Global Paging Extension

Global paging extensions are available.

1

1

14

MCA (Machine Check Architecture) Machine check architecture is supported

1

1

15

Conditional Move Instructions

The conditional move instructions CMOV, FCMOV, 
and FCOMI are supported.

1

1

16

PAT (Page Attribute Table)

The Page attribute tables are supported.

1

1

17

PSE-36 (Page Size Extension)

Page size extensions for 36-bit addresses are 
supported using a 4-byte directory entry.

1

1

18–21

Reserved on all AMD processors

0

0

22

AMD Multimedia Instruction 
Extensions

AMD additions to the original MMX™ instruction set 
are supported.

3

0

1

Summary of Contents for -K6-2/450 - MHz Processor



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands