Amcrest XVR/H5 User Manual Download Page 88 | Manualshive

Page: 88 / 149

Amcrest XVR/H5 User Manual Download Page 88

88

Below is an explanation of the fields on the TCP/IP settings screen:

•

IP Version

: This dropdown allows the user to select the IP version. The two options are IPV4 and IPV6.

•

MAC address

: This field shows the DVR

’s MAC address, which is unique to this

DVR. This number is read-only and

is used to access a local area network (LAN).

•

Static vs DHCP

: This check box allows the user to choose between a static IP address, and a dynamic IP address.

DHCP stands for Dynamic Host Configuration Protocol, and this enables the DVR to automatically obtain an IP
address from another network DVR such as a server or more commonly, a router. When the DHCP function is
enabled, the user cannot modify the IP address, Subnet Mask, or Gateway, as these values are obtained from the
DHCP function. To view the current IP address, DHCP needs to be disabled. Note: When PPPoE is enabled,
modification of IP Address, Subnet Mask, and Gateway becomes prohibited.

•

IP Address:

This field allows the user to enter a custom IP address.

•

Subnet Mask

: This field allows the user to enter a custom subnet mask. The default subnet mask is

255.255.255.0. This number is used to determine which subnetwork the IP address belongs to.

•

Default Gateway

: This field allows the user to enter the default gateway for the network. The default gateway

should be on the same IP subnet as the DVR

’s IP. That is to say, the specified length of the subnet prefix should

have the same string. For example, if the IP address is 192.168.0.25, the default gateway should start with
192.168.0.X. The default gateway is usually the IP address of the router.

•

MTU:

MTU stands for Maximum Transmission Unit. This field allows the user to set the MTU value of the

network adapter. The value ranges from 1280-7200 bytes. The default value is 1500 bytes. Please note MTU
modification may result in network adapter reboot and the network turning off. That is to say, MTU modification
can affect the current network service. The system may pop up a dialog box to confirm setup when the MTU value
is changed. Click the OK button to confirm current value and reboot or can click the Cancel button to terminate the
current modification. Before the modification, you can check the MTU of the gateway; the MTU of the DVR should

«
...
86
87
88
89
90
...
»

Summary of Contents for XVR/H5






















































































































































Reviews:

No comments