75
Parameter
Description
Bit Rate (Kb/S)
In the
Bit Rate
list, select a value or enter a customized value to change the
image quality. The bigger the value is, the better the image will become.
Video
Enable the function for sub stream.
Audio Encode
Click
More Setting
, the
More Setting
interface is displayed.
Audio Encode: This function is enabled by default for main stream. You need to
manually enable it for sub stream 1. Once this function is enabled, the recorded
video file is composite audio and video stream.
Audio Source: In the
Audio Source
list, you can select
LOCAL
and .
LOCAL: The audio signal is input from Audio input port.
: The audio signal is input from camera.
Audio Format: In the
Audio Forma
t list, select a format that you need.
Audio Source
Audio Format
When you have finished setting up your encode configuration settings, click on the
Apply
button to apply the
settings to your DVR. If you would like to revert the image back to its default setting, click on
Default
. To set the
encode settings to other channels on your DVR, click on the
Copy
button and select the channels that you wish to
apply the settings to, click
OK
when you have finished. To exit this screen, press the
Back
button.
Configuring Snapshot Settings
This tab located in the encode menu allows you to configure the encode settings for snapshot parameters.
For more information on the settings provided in this menu, refer to the table below.