manualshive.com logo in svg

Amcrest NV21 Series, User Manual

The Amcrest NV21 Series offers cutting-edge surveillance technology. Ensure you have all the necessary information with our comprehensive User Manual. Easily download and access the manual for free from our website, empowering you to make the most of your Amcrest NV21 Series and maximize security at your fingertips.

Share
Download
background image

  

  

  

 

  

 

165  

  

10.

 

Using the left-hand menu, go to the Connection menu, and write down the TCP, UDP, and HTTP port number. It 
is recommended to ensure that these port numbers are at least 5 digits long to prevent any port conflicts. If 
need be, change each of these port numbers to a 5-digit number that is less than 65535, note the numbers 
down, and click save before proceeding to the next step.   

11.

 

Go to 

http://www.canyouseeme.org/

 and check to ensure each of the port numbers specified in step 10 are 

open.  

12.

 

Write down the manufacturer name, brand, and model name for the router that the NVR is connected to, and 
then proceed to portforward.com on your web browser.  

13.

 

Open the port forwarding guide section on the left-hand side menu.  

14.

 

Find the router brand name in the list and click it.  

15.

 

Find the router model number and click it.  

16.

 

Click the Default Guide link near the middle of the page.  

17.

 

This guide will help you take the step necessary to port forward on the router. Follow these steps, and then 
return to the NVR.  

18.

 

Login to your NVR, open the main menu then go to Settings -> Network.  

19.

 

Click the DDNS menu item on the left-hand menu, click the enable checkbox, and then click the Apply button on 
the bottom right.  

20.

 

Write down the entire Domain Name field, including the white text that says.AmcrestDDNS.com  

21.

 

Open a web browser and enter in the DDNS domain name address from step 20, enter in a colon, then type the 
HTTP port number from step 10 on to the end.  

a.

 

For example, if the DDNS domain name is http://abc123456789.AmcrestDDNS.com and your HTTP Port is 

33333, the URL would be http://abc123456789.AmcrestDDNS.com:33333  

22.

 

The browser may prompt you to install a plugin. Click install to download the plugin, and then click on the plugin 
installation file to install the plugin.   

23.

 

If the browser prompts you to allow the plugin to work on the computer, hit Allow to ensure the plugin can run 
successfully.  

24.

 

Enter in login details into the username and password fields.  

25.

 

Click the WAN option, and then click Login.  

26.

 

Once the main interface opens, click the plug icons next to each camera on the list on the left-hand side, and 
activate the main stream for each of them to enable the live feed.  

If the process above is not working, please contact Amcrest Support via one of the following options:  

• 

Visit 

http://amcrest.com/contacts

 and use the email form  

• 

Call Amcrest Support using one of the following numbers Toll Free: (888) 212-7538  
International Callers (Outside of US): +1-713-893-8956  

USA: 713-893-8956  

Canada: 437-888-0177  

UK: 203-769-2757  

• 

Email Amcrest Customer Support 

[email protected]

  

Summary of Contents for NV21 Series






















































































































































































































































































Reviews:

No comments

Related manuals for NV21 Series

D-Link DES-1228/ME User Manual preview
DES-1228/ME
Brand: D-Link Pages: 267
Canon Vb-C60 - Ptz Network Camera Setup Manual preview
Vb-C60 - Ptz Network Camera
Brand: Canon Pages: 30
D-Link DSL-2640BT Installation Manual preview
DSL-2640BT
Brand: D-Link Pages: 12
Ubiquiti airFiber AF-5X User Manual preview
airFiber AF-5X
Brand: Ubiquiti Pages: 50
B&B Electronics Parallel Printer Card PIOC User Manual preview
Parallel Printer Card PIOC
Brand: B&B Electronics Pages: 16
NETGEAR RP614 v2 Installation Manual preview
RP614 v2
Brand: NETGEAR Pages: 2
TRENDnet TE100-S16 - 10/100Mbps Ethernet Switch User Manual preview
TE100-S16 - 10/100Mbps Ethernet Switch
Brand: TRENDnet Pages: 15
Isee IGEPv2 BOARD Hardware Reference Manual preview
IGEPv2 BOARD
Brand: Isee Pages: 68
Solwise WLn-401 Quick Installation Manual preview
WLn-401
Brand: Solwise Pages: 7
ANTAIRA LMP-1202G-SFP Series Hardware Manual preview
LMP-1202G-SFP Series
Brand: ANTAIRA Pages: 19
Alarm NX-208E Installation Manual preview
NX-208E
Brand: Alarm Pages: 5
Genexis FiberTwist G6426 Installation Manual preview
FiberTwist G6426
Brand: Genexis Pages: 9
Primera Disc Publisher XR Installation Instructions preview
Disc Publisher XR
Brand: Primera Pages: 2
Intel IXP45X Developer'S Manual preview
IXP45X
Brand: Intel Pages: 958
Buffalo AirStation G54 WLA2-G54 Quick Setup Manual preview
AirStation G54 WLA2-G54
Brand: Buffalo Pages: 8
ICP ICP9014RO Installation And User Manual preview
ICP9014RO
Brand: ICP Pages: 142
UMAX Technologies SuperMac E100 User Manual preview
SuperMac E100
Brand: UMAX Technologies Pages: 27
Extron electronics Network Adapter AC AAP Specifications preview
Network Adapter AC AAP
Brand: Extron electronics Pages: 2

Brands by name

Popular brands

Load more brands