AMCI NR60E2, User Manual

Page: 49 / 98

20 Gear Drive, Plymouth Ind. Park, Terryville, CT 06786

Tel: (860) 585-1254 Fax: (860) 584-1973 http://www.amci.com
EtherNet/IP Protocol
I
MPLICIT
C
OMMUNICATIONS WITH AN
EDS
49
4.5 NR60E2 Properties
If you are continuing from step 4.4, the resulting New Module screen is used to configure the network con-
nection between the NR60E2 and your controller. If you need to open the screen to perform this task at a later
time, right click on the unit in the project tree and then select “Properties” from the drop-down menu
Tabs that are not listed in the steps below are filled with reasonable defaults by the EDS file.
4.5.1 General Tab
The Name, Description, and IP address of the device must be specified here. The
[Change...]
button allows you
to change the Module Definition if needed.
Figure T4.8 NR60E2 Properties Screen - EDS
4.5.2 Connection Tab
The default RPI time is eight milliseconds. This value can be changed in this tab.