AMCI NR60E2, User Manual

Page: 41 / 98

20 Gear Drive, Plymouth Ind. Park, Terryville, CT 06786

Tel: (860) 585-1254 Fax: (860) 584-1973 http://www.amci.com
NR60E2 User Manual
S
ET THE
IP A
DDRESS AND
P
ROTOCOL
41
3.3d Use the AMCI NET Configurator Utility (continued)
3.3d.6 Press the [SCAN] button and Connect to the NR60
Pressing the [SCAN] button will open the window shown in figure T3.7. The NR60E2 will appear in the scan
list only if the encoder and your network interface are on the same subnet.
Figure T3.7 Scan for NR60
Click on the IP Address of the NR60E2 and click on the [Connect] button. The NET Configurator utility will
connect to the encoder.
3.3d.7 Click on the "Allow IP..." Checkbox to Access the IP Settings
Figure T3.8 below shows the screen that results when you are connected to the NR60E2. In order to change
the IP Address of the encoder, you must first click on the checkbox next to the text “Allow IP configuration
changes. You will need to restart the device.” Once the checkbox is selected, the [Set IP Address] button will
be enabled.
Figure T3.8 Enable IP Address Changes