Maintaining Units
136
3ware 9000 Series Serial ATA RAID Controller User Guide
immediately. If verify scheduling is enabled, the unit will not start
actively verifying until the next scheduled time.
A
Stop Verify
link appears next to the unit on the Maintenance page. If
you need to stop the verify process, use this link. (If initialization starts
because the unit had not previously been initialized, it cannot be halted, so
no
Stop Verify
link appears.)
Verifying a Unit through 3BM
1
At the main 3BM screen, select the unit by highlighting it and pressing
Enter
.
An asterisk appears in the left-most column to indicate that it is selected.
2
Tab
to the
Maintain Unit
button and press
Enter
.
3
On the
Maintain Disk Array
screen, review the information about the
unit to make sure it is the one you want to verify.
4
Tab
to the
Verify Array
field, change the setting to
Yes.
Figure 50. Verifying a Unit
5
Tab
to the
OK
button and press
Enter
again to select it.
Verification of the selected unit starts immediately.
Summary of Contents for 3ware 9000 Series
