AMCC 3ware 9000 Series, User Manual

Page: 134 / 202

Maintaining Units
128 3ware 9000 Series Serial ATA RAID Controller User Guide
The Scheduling Page appears, showing the schedule for Rebuild/Migrate
Tasks.
2 To view Verify Tasks, select it from the drop-down list at the top of the
page.
3 In the Schedule Rebuild Tasks section, select the appropriate setting:
Follow Schedule or Ignore Schedule .
The illustration below shows this setting for the rebuild task schedule.
Note: Self-test schedules cannot be turned off in this way. To disable self-tests
you must either remove all schedule times, or uncheck the tests listed in the
Tasks column. For more information, see “Selecting Self-tests to be
Performed” on page 129.
Removing a Task Schedule
When you first use 3DM, daily task schedules are defined, each starting at
12:00 am and running for 24 hours.
A maximum of seven schedules can be defined. When seven schedules are
shown for any of the tasks, you must remove a schedule before you can add
another.
To remove a task schedule
1 Choose Management > Schedule from the menu bar.
The Scheduling Page appears, showing the schedule for Rebuild/Migrate
Tasks.
2 To view Verify Tasks or Self-test Tasks, select it from the drop-down list
at the top of the page.
3 Select the checkbox next to the schedule(s) you want to remove.
4 Click the Remove Checked button.
The page refreshes, and the selected schedule(s) are removed. You can
now add another schedule.