AMCC 3ware 9000 Series, User Manual

Page: 140 / 202

Maintaining Units
134 3ware 9000 Series Serial ATA RAID Controller User Guide
Figure 49. Select Available Drive to Replace Faulted Drive
3 Tab to the Rebuild Unit button and press Enter .
4 Navigate to and select the OK button to continue.
You are returned to the main screen; “Rebuilding” appears next to the unit
you selected.
5 Press F8 to save your changes and exit 3BM .
The unit will begin rebuilding about ten minutes after the operating
system finishes loading and the 3ware driver has loaded.
Cancelling a Rebuild and Restarting It with a Different
Drive
When you start a rebuild from 3BM, you cannot cancel from within the 3BM
interface; however you can cancel a rebuild from within 3DM by using the
Remove Drive link on the Maintenance page.
If you do not want to boot the operating system and launch 3DM, you can also
cancel a rebuild by physically removing a drive, and installing another one
that you want to use. Then when you start 3BM, the unit will appear as
degraded and you can rebuild it, using the steps described under “Rebuilding
Units through 3BM” on page 132.
Note: If you want to pause the rebuild process through 3DM, you
can do so by setting or changing the rebuild schedule on the
Scheduling page. If you set a schedule for rebuilds that does not
include the current time, the rebuild process will pause.