AMCC 3ware 9000 Series, User Manual

Page: 120 / 202

Configuring Units
114 3ware 9000 Series Serial ATA RAID Controller User Guide
3DM scans the controller for information about units and drives, and
updates the information shown on the
Maintenance page.
To rescan the controller through 3BM
There is not an explicit “rescan” command in 3BM. However, if you restart
the computer, it will rescan the controllers. You can then start 3BM and use it
for configuration or maintenance tasks.
Naming a Unit
Units can be given unique names to more easily identify them. A unit can be
assigned a name when it is created. The name can also be added or changed
later.
To name or rename a unit
1 Make sure the appropriate controller is selected in the drop-down list at
the right of the menu bar.
2 Choose Management > Controller Settings from the menu bar.
3 In the Unit Names section of the Controller Settings Page, locate the unit
for which you want to change the name.
4 In the text box, enter or type over the name shown.
A name can be up to 21 characters, and can include dashes and
underscores.
5 Click the Save Names button.
Note: If you want to cancel your change before saving it, click the Reset
Names button.