13
End of operation
End of operation
1. Switch off the appliance.
2. Disconnect the mains plug.
3. Press down on the tilt lever
4
to allow the arm to raise itself.
4. Remove the mixing tool. To release the tool, rotate it anticlockwise.
5. Rotate the mixing bowl
23
slightly clockwise to remove it.
6. When the dough is ready, use a spatula to remove it from the mixing bowl.
7. Clean the parts used as described under “Cleaning”.
Working with the mincer
WARNING!
Risk of injury!
There is a risk of injury by rotating and moving parts.
− When using the mincer, put the mixing bowl
23
in position to protect the rotating fi tting for
the mixing tool. There is a risk of a crushing injury!
− Be careful when handing the sharp cutting blades of the meat cutter
20
.
Setting up the mincer to mince meat
12
15
20
21
22
For mincing, use the most appropriate of the three meat cutting discs
15
for the desired result together with the
meat cutter.
1. Pull out the mains plug to isolate the machine from the supply.
2. Hold in the knob to release the front cover
1
and turn the front cover
2
to the right to release.