Faults
114
KG 4/5/6001-2 BAH0060-5 12.17
11.3
Tool tines stopping when work is in progress
If the implement encounters an obstacle, the tool carriers may come
to a stop.
In order to prevent damage to the gearbox, install overload clutches
on the gearbox input shafts of the angular gearboxes.
If the tool carriers come to a stop, stop driving and lower the tractor's
PTO shaft speed (approx. 300 rpm) until you hear the ratchet clutch
engage. Bring the PTO shaft back to its original speed and continue
working.
If the tool carriers do not turn, rectify the malfunction:
1. Disengage the tractor PTO shaft, engage the tractor parking
brake, shut off the tractor engine and remove the ignition key.
2. Wait until the tractor PTO shaft comes to a complete stop.
3. Remove the obstacle.
The ratchet clutch is now ready to be used again.
