Layout and function
62
KG 4/5/6001-2 BAH0060-5 12.17
5.11.1
Tool tine minimum length
The tool tines are subject to wear. Replace the
tines
once they reach
the minimum length L = 150 mm.
before they reach the minimum length when
working at great working depths, in order to
prevent damage/wear to the tool carriers.
If the tines fall below the minimum length
prescribed by the manufacturer, claims due to
rock damage shall not be accepted.
Fig. 45
5.11.2 Stone
release
The tool tines (Fig. 46/1) are fastened to the
sockets (Fig. 46/2) of the tool carriers.
The sockets are shaped in such a way that the
tool tines have a spring action and can avoid
rocks and other obstacles.
Fig. 46
