Settings
KG 4/5/6001-2 BAH0060-5 12.17
97
8.7
Adjusting the cutting rail (optional, only with cracker disc roller)
Two adjuster segments (Fig. 95) with integrated
springs (Fig. 95/1) are used to adjust the cutting
rail. During operation, the blades can avoid
obstacles in the soil by deflecting upwards.
Upon delivery, the cutting rail is adjusted such
that the ends of the blades are flush with the
edges of the roller.
Fig. 95
8.7.1
Adjusting the spring force
Always perform the same settings on all adjuster segments.
1. Put the cutting rail in position A (see section
"Adjusting the response", page 98).
2. Insert 1 to 2 spacer discs (Fig. 96/1)
between the socket (Fig. 96/2) and hexagon
nut (Fig. 96/3).
Fig. 96
If the spring force changes, the
position of the blades also changes.
Readjust the blades (see section
"Readjusting worn blades", Seite 98).
