Use of the implement
104
KG 4/5/6001-2 BAH0060-5 12.17
WARNING
Risk of being crushed, caught or struck by objects ejected by
the implement when it is driven!
Instruct people to leave the danger area of the implement before you
switch on the PTO shaft.
DANGER
Before transportation, carry out a visual check that the upper and
lower link pins are secured with the original linch pins against
unintentional release.
Before transportation, fasten the side locking device of the
tractor lower link so that the connected or coupled implement
cannot swing back and forth.
When turning corners, take into consideration the wide sweep
and the centrifugal mass of the implement.
Drive in such a way that you always have full control over the
tractor with the attached implement. In so doing, take your
personal abilities into account, as well as the road, traffic,
visibility and weather conditions, the driving characteristics of
the tractor and the influence of the mounted or attached
implement.
It is forbidden to ride on the implement as a passenger and/or to
climb onto implements while they are running.
WARNING
Risk of being crushed, caught or struck by damaged
components or foreign objects ejected by the implement!
Observe the permissible implement drive speed before switching on
the tractor PTO shaft.
CAUTION
Danger from failure of the universal joint shaft in case of
excessive bending of the driven universal joint shaft!
Observe the permitted bending of the driven universal joint shaft
when lifting the implement. Excessive bending of the driven universal
joint shaft causes increased, premature wear to or immediate
destruction of the universal joint shaft.
Switch off the PTO shaft of the tractor immediately if the lifted
implement makes a lot of noise while running.
CAUTION
Danger from failure during operation when the overload clutch
engages!
Switch off the PTO shaft of the tractor immediately if the overload
clutch engages. This avoids damaging the overload clutch.
