Layout and function
KG / KX / KE BAH0063-6 04.16
87
5.17
Working with an AMAZONE mounted seed drill
To couple the mounted seed drill, fit the soil tillage implement with the
following, as required:
Coupling
parts
Lifting
frame.
5.17.1
Coupling parts (optional)
The coupling parts are used to attach the
mounted seed drill.
The coupling parts have Cat. II pivot points to
attach mounted seed drills of the same category.
Fig. 66
5.17.2
Lifting frame (optional)
If the lifting power of the tractor is not sufficient to raise the
combination of soil tillage implement, roller and mounted seed drill
with the coupling parts, the lifting power requirement can be reduced
using the lifting frame.
The lifting frame first lifts the seed drill over the roller. This reduces
the total lifting power requirement. With a reduced lifting power
requirement, the tractor hydraulics raise the combination in order to
turn at the end of a field or for transport.
During road transport, the raised lifting frame is locked.
The lifting frame is used to attach the mounted
seed drill and is available in two versions,
depending on the total weight of the seed drill.
Fig. 67
Lifting frame 2.1 (Fig. 67) is approved for
seed drills up to a total weight of 1600 kg.
