Coupling and uncoupling the implement
120
KG / KX / KE BAH0063-6 04.16
All types:
2. Release the locking straps (Fig. 108/1).
2.1 Remove the pins (Fig. 108/2).
3. Instruct persons to stay out of the danger
area between the tillage implement and the
seed drill.
4. Drive the soil tillage implement up to the
seed drill.
5. Engage the lower pivot points (Fig. 108/3)
of the seed drill using the catch hooks.
6. Switch off the tractor PTO shaft, apply the
tractor parking brake, switch the tractor
engine off and remove the ignition key.
7. Swivel the locking straps (Fig. 108/1) and
secure each with a pin (Fig. 108/2). Secure
the pins with linch pins.
8. Position the top link (Fig. 109/1) to the top
pivot point (Cat. II) of the seed drill.
9. Secure the pin with a linch pin.
10. Align the seed drill so that it is straight by
lengthening or shortening the upper link.
Secure the position of the upper link with
the lock nut (Fig. 109/2).
11. Adjust the lifting height of the seed drill to
the universal joint shaft (see section
"Adjusting the lift height limiter", page 133).
12. Couple the supply line for the hydraulic
hose lines (see section "Coupling the
hydraulic hose lines", page 109).
Fig. 108
Fig. 109
Fig. 110
