Use of the implement
142
KG / KX / KE BAH0063-6 04.16
10.2 During
the
work
In the event of tine wear, correct the following settings:
The working depth of the soil tillage implement
The side panels
The
levelling
board
The tractor wheel mark eradicator.
When working at great working depths, it is necessary to replace the
tool tines with new ones even before they reach the minimum length
in order to prevent damage or wear to the tool carriers.
The working depth can be adjusted hydraulically
during work.
Fig. 148
Actuation of the control unit (
Beige
) adjusts the
working depth of the rotary cultivator.
Lock the control unit (
Beige
) after each
adjustment.
The scale (Fig. 148/2) displays the set working
width.
10.2.1
Turning at end of the field
Switch off the tractor PTO shaft when turning if the angle of the
universal joint shaft becomes too large or the implement does not
run smoothly when raised.
Before turning at the end of the field
Raise the mounted seed drill over the
packer roller using the lifting frame
(optional).
Raise the combination using the tractor
hydraulic system until the combination has
sufficient ground clearance.
Fig. 149
