Faults
KG / KX / KE BAH0063-6 04.16
145
11 Faults
WARNING
Danger of crushing, shearing, cutting, being caught or drawn in,
winding and knocks through:
unintentional lowering of the implement raised using the
tractor's 3-point hydraulic system.
unintentional lowering of raised, unsecured implement
parts.
unintentional start-up and rolling of the tractor-implement
combination.
Secure the tractor and the implement against unintentional start-up
and rolling before eliminating faults on the implement.
Wait for the implement to stop, before entering the implement danger
area.
11.1
Initial use of the tooth packer roller
If the tooth packer roller rotates with difficulty when first used, e.g.
because of areas glued by paint, do not adjust the scrapers of the
tooth packer roller, but rather pull the roller over solid ground.
11.2
Tool tines stopping when work is in progress
If the implement encounters an obstacle, the tool carriers may come
to a stop.
To prevent damage to the gearbox, the gearbox input shaft is fitted
with an overload clutch.
If the tool carriers come to a stop, stop driving and reduce the tractor's
PTO shaft speed (approx. 300 rpm) until you hear the ratchet clutch
engage. Bring the PTO shaft back to its original speed and continue
working.
If the tool carriers do not turn, rectify the malfunction:
1. Switch off the tractor PTO shaft, apply the tractor parking brake,
switch the tractor engine off and remove the ignition key.
2. Wait until the tractor PTO shaft comes to a complete stop.
3. Remove the obstacle.
The ratchet clutch is now ready to be used again.
