Transportation
136
KG / KX / KE BAH0063-6 04.16
9.1
Move the implement in the transport position
1. Instruct any people in the area to stand at
a minimum distance of 10.0 m from the
implement.
2. Switch off the tractor PTO shaft.
3. Deactivate the lifting frame height limiter
(optional):
Using the white pull rope (Fig. 142/1), pull
the actuation hook to the front (Fig. 142/1).
4. Raise the lifting frame:
Actuate tractor control unit (
green
) until the
lifting frame is fully raised.
5. Check whether the lifting frame is locked
(see section "Transport locking mechanism
for lifting frame", page 131).
Fig. 142
6. Swivel the track marker into transport
position:
Actuate the tractor control unit (yellow)
until the track markers are fully raised.
7. Check whether the track markers are
locked (see section "Moving the track
marker to transport position", page 144).
8. Raise the soil tillage implement.
9. Lock the tractor control units.
10. Switch off the on board computer.
11. Check the lighting system for correct
operation.
12. Switch on the warning beacon (if present),
which is subject to authorisation, and
check for correct function.
Fig. 143
9.2
Transporting with a transport vehicle
Transport of a implement combination over 3.0 m wide is only
permitted on a transport vehicle.
When transporting implement combinations (see section
"Combination possibilities with AMAZONE implements", page 86),
pay attention to the width of the loaded transport vehicle.
The vehicle keeper and driver are responsible for compliance with the
statutory stipulations.
