Cleaning, maintenance and repair
168
KG / KX / KE BAH0063-6 04.16
Corrosion of panel, reducing the function and tightness.
Installation requirements not complied with.
Life span of 6 years has been exceeded.
The date of manufacture of the hydraulic hose line on the
assembly plus six years is decisive. If the date of manufacture
on the assembly is "2015", then the hose should not be used
after February 2021. For more information, see "Identification of
hydraulic hose lines".
12.15.4 Installing and removing hydraulic hose lines
When installing or removing hydraulic hose lines, be sure to observe
the following instructions:
Use only genuine AMAZONE hydraulic hose lines!
Ensure
cleanliness.
As a matter of principle, you must install the hydraulic hose lines
such that, in all implement situations,
There is no tension, apart from the hose's own weight.
There is no possibility of compression for short lengths.
Outer mechanical influences on the hydraulic hose lines are
avoided.
Use appropriate arrangements and fixing to prevent any
scouring of the hoses on components or on each other. If
necessary, secure hydraulic hose lines using protective
covers. Cover sharp-edged components.
The approved bending radii may not be exceeded.
When connecting a hydraulic hose line to moving parts, the hose
length must be appropriate so that the smallest approved
bending radius is not undershot over the whole area of
movement and/or the hydraulic hose line is not over-tensioned.
Attach the hydraulic hose lines onto the specified attachment
points. There, avoid hose clips, which impair the natural
movement and length changes of the hose.
It is forbidden to paint hydraulic hose lines!
