19
EN
Inrush current flow
• In AC current measurement mode, press the
PEAK/INRUSH
button (L) to measure the
inrush current value. The
INRUSH
indicator
(7) appears.
• When the circuit is switched off, clamp on the
circuit being tested for inrush.
• Energize the circuit being tested.
• The product captures the inrush current and
the reading hold on the display (F).
• Press the
PEAK/INRUSH
button (L) for
2 seconds to return to normal operation.
The
INRUSH
indicator (7) disappears.
CAUTION
Risk of short circuit!
Use the
test probe shrouds (R) to avoid accidental short
circuiting if the components or test points are too
near each other.
AC voltage measurement
• Insert the black connector lead (S) into the
negative
COM
(black) terminal (I) and the red
connector lead (S) into the positive
V
(red)
terminal (M).
• Set the function switch (K) to the position.
