－ii－
■
INTRODUCTION
Thank you for purchasing the MJ Series Mist Collector. To ensure its long use and operational
safety, read this operation manual carefully before operating the product. After reading the
manual, keep it close at hand so that you can refer to it when necessary.
■
The MJ Series Mist Collector is to be mounted on a machine tool in order to collect water-soluble
mist or *oily mist.
※
If high density mist is drawn in, the MJ unit may not be able to process it completely, causing the mist to leak
from the outlet. Therefore, attach an after filter (option) before collecting high density or oily mist.
■
The MJ unit is not equipped with a protective device for the motor. Thus, power must be supplied
from the machine tool circuit equipped with a protective device. (See page 16 for power connection
details.)
■
To operate the MJ unit separately, provide an electrical component equipped with a protective
device (electromagnetic switch with thermal relay, fuse-less breaker, or earth leakage breaker).
■
The installation of optional parts will render the product inapplicable for CE conformity (excluding
the use of ducts, cuffs, or hose clamps).
■
The use of non-standard power supply voltage specs will render the product inapplicable for CE
conformity (power supply specs other than 3-phase 200V 50Hz/60Hz or 3-phase 220V 60Hz are
inapplicable).
■
The MJ series need a periodical check to maintain the designed performance. (Refer to page 31 for
the periodical check.)
■
The manufacturer and dealers are not responsible for accidents or damage due to the following causes.
・
Improper operating conditions or usage different from that specified in this manual.
・
Failure to maintain the mist collector or replace the consumable parts as specified in this manual.
・
Any modification, repair, or equipment transfer performed by a third party or personnel not
authorized by AMANO.
・
Natural disasters or calamities, such as fires, earthquakes, or floods.
・
Any event that could not be predicted scientifically or technologically at the time of manufacture.
・
Other causes that are not the responsibility of AMANO.
MODELS
Model name
Output (kW)
Max. capacity (m
3
/min)
Dimensions (mm)
Inlet dia. (mm)
3.7 (50Hz)
MJ-5
0.4
4.5 (60Hz)
Max. width 433 Height 484
φ98
7.0 (50Hz)
MJ-10
0.75
8.5 (60Hz)
Max. width 472 Height 522
φ123
13.0 (50Hz)
MJ-15
1.5
16.0 (60Hz)
Max. width 576.2 Height 629.3
φ148
18.0 (50Hz)
MJ-25
2.2
22.0 (60Hz)
Max. width 631.8 Height 702.6
φ198
■
If anything related to the product or this operation manual is unclear, please contact the dealer or the sales office.
■
The specifications and appearance of the dust collector and the description in this manual are subject to change
due to improvements.
■
When warning labels look like they might come off, contact the dealer or sales office to get new ones for
replacement.
■
Although the illustrations in the manual depict the MJ-5 model, the same operation procedures apply to all
models.
